Tube Pulling And Removal

Javelin

The Javelin is a compact and dependable tube pulling (puller) machine and is designed for continuous and stub removal of tubes from heat exchangers, condensers and boilers. A fully tried and tested system that can be used where access is tight, this does not however compromise power of pulling capacity.

Javelin with 30 Ton Gun	Download PDF
Pulling Range Continuous :
METRIC :	12.5mm OD To 32mm OD
IMPERIAL :	1/2" OD To 1 1/4" OD
Javelin with 60 Ton Gun
Pulling Range Continuous :
METRIC :	38mm OD To 51mm OD
IMPERIAL :	1 1/2" OD To 2" OD

Click here to view the products consumables!

Trident

The Trident Tube Puller is a fast and dependable automatic tube pulling machine and is designed for continuous and stub removal of tubes from heat exchangers, condensers and boilers.

Trident with 15 Ton Gun	Download PDF
Pulling Range Continuous :
METRIC :	12.5mm OD To 32mm OD
IMPERIAL :	1/2" OD To 2" OD
Trident with 30 Ton Gun
Pulling Range Continuous :
METRIC :	12.5mm OD To 38mm OD
IMPERIAL :	1/2" OD To 1 1/2" OD
Trident with 45 Ton Gun
Pulling Range Continuous :
METRIC :	38mm OD To 76mm OD
IMPERIAL :	1 1/2" OD To 3" OD

Click here to view the products consumables! Click here to view a short clip on the Trident!

One Revolution Cutter

The One Revolution Cutter is suitable for cutting steel and non-ferrous tubes used in condensers, heat exchangers and boilers. This cutter is designed for use with a ratchet or hand wrench, not a power tool.

One Revolution Cutters	Download PDF
Range :
METRIC :	12.5mm To 63.5mm OD
IMPERIAL :	1/2" To 2 1/2" OD
REACH :	50.8mm To 152.4mm Optional Up To 610mm

Push Type Cutter

The Push Type Cutter can be driven with a pneumatic or electric drill motor and each tool is suitable for most tube wall thicknesses.

Push Type Cutter	Download PDF
Range :
METRIC :	9.5mm To 101.6mm OD
IMPERIAL :	3/8" To 4" OD
REACH :	Up To 152mm