The One Revolution Cutter is suitable for cutting steel and non-ferrous tubes used in condensers, heat exchangers and boilers. This cutter is designed for use with a ratchet or hand wrench, not a power tool.
The One Revolution type cutter is suitable for cutting steel and non-ferrous tubes used in condensers, heat exchangers and boilers.
The tool is adjustable to tube sheet thickness from 2” to 6” (50.8mm – 152.4mm), extended tools are available on request.
The tool is designed for hand operation using either a ratchet or hand wrench it is not suitable for use with a power tool.
The tool operates by turning the tool clockwise, this brings the cutter tip into contact with the inside of the tube, the tip punctures the tube and locks in position to cut through the tube as it turns.
|Range||12.5mm To 63.5mm OD||1/2" To 2 1/2" OD|
|Reach||50.8mm To 152.4mm, Optional Up To 610mm|